热门搜索:

厦门晶鼎自动化科技有限公司是一家具有独立法人资格的**企业;代理销售的产品有中国台湾威纶触摸屏,魏德米勒全系列,永宏触摸屏,威纶触摸屏,中国台湾威纶weinview触摸屏,中国台湾永宏PLC,FATEK,永宏伺服,图儿克总线,施耐德,欧姆龙,西门子,富士变频,K&N蓝系列, BUSSMANN,松下变频器,丹佛斯变频器等。

    供应CL10-W

    更新时间:2024-03-28   浏览数:266
    所属行业:机械 电工电气 电工电器成套设备
    发货地址:福建省厦门湖里区湖里街道湖里社区  
    产品规格:CL10-W
    产品数量:
    价格: 面议
    产品规格CL10-W

    厦门晶鼎自动化科技有限公司特价供应,有需要前来咨询,联系人:黄先生 电话:/ Q

    电缆室照明灯 CL10-W
    Cable Cabinet Lamp CL10-W
    CL10-W作为传统电缆室照明灯的替代方案,采用LED作为发光光源,并采取特殊的结构,实现低成本、高可靠、易用性的应用设计。
    应用场合
    Application
    技术数据
    Technical data
    CL10-W
    电源
    power supply
    AC/DC110V~230V
    功耗
    Power consumption
    <3W
    接线端子
    Terminals
    导线截面较大至4mm2
    Conductors up to 4mm2
    防护等级
    Protection class
    IP20
    环境温度
    Ambient temperature
    -25 °C to +50°C
    LED使用寿命
    LED life span
    >50,000h
    耐压强度
    Insulating strength
    AC2000V, 50Hz, 1Min
    发亮时间
    Lighting continuance
    1800s±15% (也可按客户要求定制)
    1800s±15% (variable for demand of customer)
    再次启动间隔时间
    Re-start interval
    不**过8秒钟
    Less than 8 seconds
    外壳材料
    Material of enclosure
    材料性能符合DIN7708标准
    Insulating material according to DIN7708
    连接电缆
    Connecting cable
    阻燃电缆2×0.5mm2,3.5米(长度可依用户需求提供)
    Flame retardant cable, 3.5m(length variable for demand )
    光照度
    Illuminance
    距离光源30cm处,≥350lx
    30cm away from light source, ≥350lx
    The light source control unit mounts in the safe operation re-gion, illuminance head mounts in the suitable place that the end illuminates a region in demand. Connect power, illumi-nance head take power from the light source control unit, illu-minating a region selected. After connecting power, keeping on time that gives out light is for 30 minutes, and automatical-ly goes out . If want restart, connect power again after dis-connecting power no less than 8 seconds.
    Suggest: to disconnect power after every time use .
    将光源控制单元安装于便于安全操作区域,发光头安装于需要照明区域的合适位置。接通电源,光源控制单元通过连接电缆点亮发光头,照亮选定区域。接通电源后,发光持续时间30分钟后自动熄灭。若要重新启动,必须在断开电源不少于8秒后再接通电源。
    建议:在每次使用后断开电源。
    使用方法
    Use Method
    The CL10-W is the substitute for the traditional cable cabinet lamp, adopt LED as light source, and adopt special structure, carry out low cost and high reliability and use easily .
    安装
    Installation
    电缆室照明灯由光源控制单元、连接电缆和发光头组成。光源控制单元配有接线端子可直接连接电源,其中A1(+)接AC“L”或DC“+”,A2(-)接AC“N”或DC“-”,+接连接电缆红线,-接连接电缆黑线。光源控制单元安装在DIN 35mm标准导轨上,发光头可用螺栓夹紧的方式安装在电缆室需要光照的地方。
    Cable cabinet lamp consists of light source control unit and connecting cable and illuminance head.The light source control unit has the wiring terminal that can connect a power supply directly, among them, the A1(+)connect the AC"L" or DC"+", the A2(-) connects the AC"N" or DC"-",the + connect the red line of connecting cable, the - connect the black line of connecting ca-ble. The control unit can mount at a standard DIN 35 mms rail.The illuminance head can fix tightly in the suitable place that the head illuminates a region in the demand with screw .

     


    http://hmh1986.b2b168.com